Paint Klub - Skulltaker

The model due at the end of the month for Paint Klub is Skulltaker. Over the weekend I started working on him, or at least, the base:


All the pieces lined up and ready for assembly



The original plan for how the steps would be laid out.



I knocked the pieces and they formed a spiral shape, so I thought that would be more fun. Wait for it...



The base goes together - HORRIBLY! Turns out I got the angles wrong, and the middle step wasn't nearly large enough for the model to be in scale (I've learned since I painted the Jester model) so it was back to the original plan...



Back to reliable ol' Plan A. How I missed you...



A bit of Tamiya putty around the edges to blend the layers together a bit (It will be fixed up properly later) and some pipes in place...



The piece connected to the base itself. I need to run some putty around the edges and then sand it back to blend it together.



Skulltaker! Or, part of him. Just to get a feel of how he looks on the base. The plan is to have blood fountaining out of the pipes, brass plates for the flooring (The classic Khorne scheme in other words). Then again, the plan was to have a spiral staircase as well...

Comments

  1. AndrewFebruary 12, 2010 at 10:11 AM

    I'm always amazed at your ability to cut perfectly rounded pieces of plasticard!

    ReplyDelete

Post a Comment

Popular posts from this blog

Things Get Painted: Lessons Learned from Black and White Painting

Image
My most recent project wasn’t well thought out. At first it was meant to be a quick experiment with some skin tones and an attempt at a semi-noir look, and turned into a set of five models which I was really proud of. I also learned a lot about the process on the way.     The less colours you use, the easier this gets The first model I did, Stone, used a total of nine colours. This was initially not an attempt at strict black and white, but I intended to try to use a pale skin tone I had heard about on Reaper Live during their Kickstarter launch, and do the rest in grey tones. As the progress went on, I started reusing colours until I only had nine at the end. It narrowed the colour range, but after a comment from a friend at PAX helping with the four-colour challenge, I decided to aim for 4 colours on the next few models, namely Dragon Black, Dragon White, Tempest Grey, and a flesh tone. Stone, the most colourful of the group. It may not be noticeable here,
Read more

Things Get Painted: GW Contrast Paints

Image
Everyone in the painting community has heard about Contrast Paints by now, so I'm not going to talk about what they are or how they work too much. Basically, they were released this weekend, and one of my friends ( Numbat ) picked up a few, and brought some along to our Sunday night painting for me to try. A few hours before he arrived, I realised that I would need a few models to try these out on, and went to my usual go to emergency miniatures: Reaper Bones. Look at them gathered there, slightly out of focus, judging me...   I'd heard that people were using standard sprays on the models as well as the new Wraithbone and Grey Seer undercoats, and that the pre-existing undercoats work fine. So I glued a few Lizardmen to bases, and did three versions of undercoat:  From left to right, Corax White, Mechanicus Standard Grey with Corax White sprayed from the stop, and then plain Mechanicus Standard Grey.    One thing to note here is that Mechanicus Standard Gr
Read more

Things Get Painted - Seishin, and some first impressions of Hexwraith Flame

Image
Note: I started writing this post before the GW Contrast Paints were released, so this post doesn't directly compare the two. I understand that Hexwraith Flame was one of their prototype Contrast paints, however having used the two, there appears to be enough difference for me to warrant treating them differently to each other for the course of this post.    Even though I only recently finished the first models of my Leveticus crew, I've started a new Malifaux Crew! I'm enjoying getting some older metal models through the process quickly, as I'm not aiming for a display piece on older models, just a tabletop quality piece where I can try something new. This time round, I realised that Kirai's crew full of spirits would be a great chance to try out Hexwraith Flame. I have planned out the colour scheme in more detail, but am still in the process of writing that up. But with 5 Seishin staring at me, I figured it was a good chance to quickly get these started
Read more